Parts by Type

print This page

Yoke Shafts

Filters: JOINT ANGLE = ,
PART NUMBER SERIES PART TYPE SPLINE COUNT SPLINE DIA. SPLINE LENGTH C/L TO END END TO RADIUS BOOT NOTES VEHICLE CLASS BRAND
3-82-981 1350 Staked 10 1.500 1.500 5.820 0.000 LD Spicer
2682-800 7260 ISR 15 0.980 0.675 4.500 3.000 Fits Mercury outdrives LD PTI
2-82-1731 1210 OSR 15/16 1.250 2.250 8.391 7.866 LD Spicer
6-82-1331-1 1710 BP 15/16 2.500 3.500 9.656 6.656 Obsolete HD Spicer
2-82-211 1310 OSR 16 1.250 1.656 4.594 2.938 LD Spicer
2-82-41 1310 OSR 16 1.250 2.000 5.812 2.063 LD Spicer
2-82-58X 1310 OSR 16 1.375 2.500 7.062 5.190 LD Spicer
3-82-1321 1350 OSR 16 1.500 2.000 5.844 3.781 LD Spicer
3-82-1301 1410 OSR 16 1.500 2.000 5.406 3.312 LD Spicer
3-82-268X 1410 OSR 16 1.500 3.000 8.969 6.281 LD Spicer
3-82-781 1410 OSR 16 1.750 3.000 6.340 4.410 LD Spicer
5-82-961-5 1610 BP 16 2.000 3.500 14.063 10.063 HD Spicer
5-82-871 1610 BP 16 2.000 3.000 7.297 4.547 HD Spicer
6-82-1381 1710 BP 16 2.500 3.160 10.320 6.980 HD Spicer
4-82-621-3 1550 OSR 16 2.500 1.562 5.609 3.672 LD Spicer
4-82-621-4 1550 OSR 16 2.500 1.562 6.188 4.250 LD Spicer
6-82-1391 1710 BP 16 2.500 3.000 8.650 5.906 HD Spicer
6-82-1371 1710 BP 16 2.500 2.750 8.910 5.570 HD Spicer
6-82-1411 1710 BP 16 2.500 3.160 9.820 6.480 Obsolete HD Spicer
1482-62 1451-22 OSR 16 1.063 3.000 6.385 4.250 Volvo LD PTI
3082-62 1300 OSR 16 1.375 3.650 7.310 5.750 3051-27 Volvo LD PTI
N5-82-01 1610 BP 16 2.000 2.875 9.220 5.400 For Short Coupled Shafts HD Neapco
2682-801 7260 ISR 17 1.125 3.000 11.375 9.500 Fits Mercury outdrives LD PTI
5-82-951-1 1610 BP 18 2.672 1.500 7.140 5.080 Spline not glidecoated HD Spicer
3482-18 3451 OSR 18 1.470 5.125 8.500 6.000 This yoke shaft will not fit the OEM splined sleeve. Old PTI Sprinter style usage. LD PTI
2-82-1961 1330 OSR 23 3.000 4.140 8.250 5.550 mates with 2-55-278X sleeve, uses 212115X boot LD Spicer
1182-241 9951-22 Staked 24 0.972 1.693 5.130 3.272 N/A Infiniti Front Shafts, Staked joints LD PTI
1182-242 9951-22 Staked 24 0.972 1.575 4.461 3.265 N/A Infiniti Front Shafts LD PTI
1182-243S 1151-243 OSR 24 0.972 1.575 4.449 3.265 N/A Infiniti Front Shafts with snap rings LD PTI
1182-243L 1151-243 OSR 24 0.972 1.575 5.157 3.265 N/A Infiniti Front Shafts with snap rings, tip is pointed LD PTI
2182-272 1210 OSR 26/27 1.161 4.019 6.432 4.713 2716-497, 2715-285, 2714-612, 2182-272M Can only be used with 26/27 sleeves, machined for clearance on CB. LD PTI
3182-272 1310 OSR 26/27 1.161 4.060 6.750 5.250 2716-497, 2715-285, 2714-612 Can only be used with 26/27 sleeves LD PTI
2182-27 1210 OSR 27 1.161 4.019 6.432 4.713 2716-497, 2715-285, 2714-612 BMW Yoke shaft LD PTI
2782-272 1751 OSR 27 1.147 1.181 3.375 1.875 BMW Front Shaft LD PTI
3182-271 1310 OSR 27 1.161 4.060 6.750 5.250 2716-497, 2715-285, 2714-612 LD PTI
2782-271 1751 OSR 27 1.147 1.181 2.750 1.300 BMW Front Shaft LD PTI
3-82-1151-2 1350 OSR 30 1.302 2.219 6.590 5.430 LD Spicer
140-82-21X SPL140 SPRTAB 30 3.071 8.661 11.811 7.660 212059X 91-30-2-132M boot can replacement, used with 140-55-21X sleeve HD Spicer
3182-311 1310 OSR 31 1.330 3.750 7.125 5.700 2718-628 1.378" (35mm) Bearing Surface LD PTI
3R82-322 3R ISR 31/32 1.375 3.500 11.500 5.250 Like 3R82-321 but with long neck LD AAM
3R82-321 3R ISR 32 1.375 3.350 7.810 5.910 N2112504, 3R18-321 Used on Auto Trac Transfer cases from 1998-2007.
Includes GM K-series 4x4s, Hummer H2 and GM-G Vans.
Boot also available, part N2112504. 		LD AAM
3182-32 1310 CV 32 1.378 3.500 9.500 7.500 3R18-321 CV conversion for GM Auto Trac
Used on GM front shafts		 LD PTI
N2-81-1181 1310 Flanged 32 1.378 3.500 0.000 6.380 3R18-321 PTI version is 3182-32. This part has a 2" Pilot and 3" BC. LD Neapco
40137666 1410 OSR 32 1.378 9.055 40123472 external splined shaft transmission yoke LD AAM
3182-322 1310 CV 32 1.378 3.500 10.250 5.875 GM Front Auto-Trac LD PTI
40006885 3R ISR 32 1.375 3.350 7.810 5.910 N2112504, 3R18-321 Auto Trac Transfer LD AAM
170-82-121X SPL170 SPRTAB 34 3.425 8.720 12.441 7.720 100-30-2-115M, 170-82-131X HD Spicer
170-82-191X SPL170 SPRTAB 34 3.464 7.500 11.062 6.340 100-30-2-84M HD Spicer
170-82-101X SPL170 SPRTAB 34 3.464 9.744 13.457 8.730 100-30-2-141M Active HD Spicer
170-82-71X SPL170 SPRTAB 34 3.464 10.335 13.850 9.130 100-30-2-156M HD Spicer
P170-82-71X SPL170 SPRTAB 34 3.464 10.335 13.850 9.130 100-30-2-156M HD PTI
170-82-21X SPL170 SPRTAB 38 3.858 9.193 11.811 7.800 211959X Mates with 250-55-31X sleeve HD Spicer
250-82-21X SPL250 SPRTAB 38 3.858 8.555 11.811 7.820 211959X Mates with 250-55-31X sleeve HD Spicer
P170-82-21X SPL170 SPRTAB 38 3.858 9.193 11.811 7.800 211959X Mates with 250-55-31X sleeve HD PTI
P250-82-21X SPL250 SPRTAB 38 3.858 8.555 11.811 7.820 211959X Mates with 250-55-31X sleeve HD PTI
NOE-12-2657-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
4.540" CL-CL 		LD Neapco
NOE-12-2658-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
8.54" CL-CL
 LD Neapco
NOE-12-5244-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
1.690" CL-CL
 LD Neapco
NOE-12-5122-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
8.02" CL-CL
AXLE DIAMETER .750		 LD Neapco
NOE-12-5139-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
7.49" CL-CL
AXLE DIAMETER .937		 LD Neapco
NOE-12-5147-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
7.650" CL-CL
AXLE DIAMETER .937		 LD Neapco